Combined rotor span 58", Loa 32", Mass 770g, calculated disc area 8.5 sq ft.
Calculated rotor loading @ 75% efficiency of rotor area 4.2 oz/sq ft.
Construction is clear laminate plastic foil over 3mm depron sheet, some 2mm balsa, some carbon tube and rod (from kids stunt kites, local super market).
Two t2m T590127 1060 kv brushless motors,two T7016 (16 amp) ESC with two pelikan 1000 mAh 3 cell lipo's running two 9x6 APC props. These run via a Y lead to a Jeti reciever ( both BEC enabled) and two 9g servos for rudder/elevator. Rudder is nylon kite string closed loop, Elevator is bamboo and carbon push rod. Home made wheels were too heavy so a pair of 50mm OK wheels used.作者: arced 时间: 2007-8-16 11:42
