5iMX宗旨:分享遥控模型兴趣爱好

5iMX.com 我爱模型 玩家论坛 ——专业遥控模型和无人机玩家论坛(玩模型就上我爱模型,创始于2003年)
查看: 5964|回复: 15
打印 上一主题 下一主题

在凤凰模拟器里发现一架飞机很好飞,网上找了资料贴上来

[复制链接]
跳转到指定楼层
楼主
发表于 2010-5-6 11:37 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
MSH Protos Kits
The MSH Protos is definitely one of the most unique designs to appear on the RC Helicopter market in a long time.

Made in Italy, this kit offers a fresh approach with a super simple frame assembly and totally unique drive system. While all other mainstream "cookie cutter" designs move toward locating all the servo components and linkages into the frameset, the MSH Protos incorporates an elegant approach with the servos and linkages  located in a robust inner-assembly allowing for EASY and QUICK frame replacement should the need arise.

The Protos also incorporates a unique single belt, ultra quiet and smooth drive system like none other and a triple bearing supported main mast.

This is an extremely light and fast 500 class machine. No other machine in the 500 class will match its performance. The quality of this kit is outstanding. Fit and finish on all parts aluminum or plastic is exceptional and the SAB blades included in the kit are second to none.

So if you are getting bored with all the cookie cutter mainstream designs out there, then it's time to fly something new and exotic for a change. And rest assured, just like all helicopters we carry, we are committed to COMPLETE parts support.

These are the latest kit versions with the latest modifications!
  • New main shaft (steel hollow) - This modification addresses the previous tracking problems.
  • New main blade grips - Bearing placement rearranged to put the thrust bearing inside in order to have wider support to the grip and eliminate play. Putting the thrust bearing inside also enhances the life of the thrust bearings.
  • New washout arms - The hole where the pin engages is now much tighter.
  • New tail pitch boss - Opened up the channel in which the screws ride in order to have a much smoother movement of the assembly.
  • New T/R box - Strengthened the area around the fin screw holes.
  • New tail Fins - Stiffer and longer.
Take a peek a the Protos 500 Assembly Manual


Displaying products 1 - 6 of 6 resultsShow:
MSH Protos Carbon Kit - With Motor+ESC and SAB main bladesPrice: $461.50



MSH Protos Carbon Kit - With Motor+ESC and SAB main blades MSH51104


MSH Protos 500 Helicopter Carbon Kit OnlyPrice: $328.90



The MSH Protos 500 Helicopter Carbon Fram Kit Only! Totally new design approach results in a ballistic performer and a great value for your added components.


MSH Protos 500 Helicopter kit with Motor+ESC and CF SAB BladesPrice: $388.70



The MSH Protos 500 Helicopter kit with Motor+ESC and CF SAB Blades!! Totally new design approach results in a ballistic performer!


MSH Protos 500 Helicopter kit with motor and CF SAB BladesPrice: $324.99



The MSH Protos 500 Helicopter kit with motor and CF SAB Blades!! Totally new design approach results in a ballistic performer!


MSH Protos 500 Helicopter kit NO motor and CF SAB BladesPrice: $301.99



The MSH Protos 500 Helicopter kit NO motor. Kit includes CF SAB Blades!! Totally new design approach results in a ballistic performer!


MSH Protos 500 Helicopter kit onlyPrice: $271.70



The MSH Protos 500 Helicopter kit only. No blades, no motor, no ESC. Totally new design approach results in a ballistic performer and a great value for your added components.


Email Address:  
Password: You will be prompted to enter your password on the next page



Your cart is empty.


欢迎继续阅读楼主其他信息

沙发
发表于 2010-5-6 12:02 | 只看该作者

老美的飞机 ............

3
 楼主| 发表于 2010-5-6 12:06 | 只看该作者
不是,看介绍是意大利生产。
4
发表于 2010-5-6 16:05 | 只看该作者
不错:em26:
5
发表于 2010-5-6 16:35 | 只看该作者
意大利的
6
发表于 2010-5-6 19:40 | 只看该作者
意大利顶级3d机
日字框和混控臂很小!所以十分灵活.塑料机..除了中联.主轴和主轴轴承座等..其他都是塑料的..它的主轴是空心的..因为两面受抗击力更强..还是全皮带传送.所以飞起来只听到电机声!空机价格在香港大概是两千块!
7
发表于 2010-5-7 17:14 | 只看该作者
看不到
8
发表于 2010-5-7 20:54 | 只看该作者
我怎么也看不见?
9
发表于 2010-5-11 09:46 | 只看该作者
原帖由 齐包 于 2010-5-6 19:40 发表
意大利顶级3d机
日字框和混控臂很小!所以十分灵活.塑料机..除了中联.主轴和主轴轴承座等..其他都是塑料的..它的主轴是空心的..因为两面受抗击力更强..还是全皮带传送.所以飞起来只听到电机声!空机价格在香港大概是两 ...


请问在香港哪里可以买到?倒是很有兴趣。
10
 楼主| 发表于 2010-5-11 10:26 | 只看该作者
香港模型店最集中的是广华街。
二手区好像有人在卖。
11
发表于 2010-5-11 18:58 | 只看该作者
原帖由 乐陶陶 于 2010-5-11 10:26 发表
香港模型店最集中的是广华街。
二手区好像有人在卖。
12
发表于 2010-5-16 04:27 | 只看该作者
刚入手1架,香港网购:em15:
13
发表于 2010-5-17 20:43 | 只看该作者
配件是个难题,飞机应该不错。
14
发表于 2010-6-24 10:54 | 只看该作者
楼主,我怎么什么东东都看不到???
15
发表于 2010-7-22 17:52 | 只看该作者
老美的飞机 ............
16
发表于 2010-8-3 17:17 | 只看该作者
唉,这年头英文不好也是个头疼的事儿啊。。。。
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

关闭

【站内推荐】上一条 /1 下一条

快速回复 返回顶部 返回列表